Two-Piece Cans Two piece can consists of can lid and can body,the body is formed by punch From a tin/aluminum plate. packed foods：fruit,meat,aquatic products,Cheese and so on. Material：tin,aluminum Round Can NO. Diameter(mm) Height(mm) 1 65/211 39~68 2 73/300 32~42 3 83/307 34~54 4 99/401 39~52 Remark Internal Lacquer Lid Style Gold/aluminum Normal/EOE

732# Empty Aluminum Round 2 Piece Food Cans With 300# EOE 2 piece can is made on punching machine, one piece tinplate sheet will be cut to be round shape firstly and then be punched vertically. 2 piece can usually has aluminum internal lacquer and used to pack meat and fish. 2 piece can is stack-able because the bottom diameter is a little smaller than top. It is able to make printing external surface, but it’s a little more difficult than 3 piece can. Anyway, Interpack Group can do it perfectly. Can Body Picture No. Item Spec 1  Material Aluminum 2  Diameter  300# (72.3mm± 0.10mm) 3  Height  (31.90⁓32.10) ± 0.10mm 4  Thickness  0.18mm 5  Internal Lacquer  Aluminized Organosol 6  External Lacquer  Epoxy Amino - Plain or printed 7  Flange Width  2.8 ± 0.20mm 8  Suitable food  Meat, fish and so on Double Seam Specification Picture No. Item Spec.   1  Countersink  3.30 ⁓ 3.50mm 2  Seam Thickness  1.20 ⁓ 1.40mm 3  Seam Length  2.80 ⁓ 3.00mm 4  Body Hook  1.80 ⁓ 2.10mm 5  Cover Hook  1.80 ⁓ 2.10mm 6  Actual Overlap  >1.02mm 7  %Overlap  >50 8  %Free Wrinkle  >60 Packaging Other Terms: No. Item Spec. 1  Lead time  Around 30 days 2  Payment term  1) 100% L/C at sight  2) 30% by T/T in advance, balance against B/L copy  3) Other payment term Should be negotiated 3  Free service  Free seaming chuck (2 pc) 4  Other service  Cost effective seaming machine

603# Easy Open Tin Can Lid Tin lids has two styles usually: standard normal end/lid and easy open end.. Standard normal end/lid must be opened by can-opener. Easy open lid is much more easily. You only need to pull the easy open ring, and then the food will be available. Picture No. Item Spec 1  Thickness  0.22mm 2  The volume of tin  2.8/2.8 3  Internal Diameter 153mm 4  Round edge height 1.75-2.15 5 Surface depth  0.90-1.20 6  Open force  15-30 7 Full open force  50-90 Packaging Other Terms: No. Item Spec. 1  Lead time  Around 30 days 2  Payment term  1) 100% L/C at sight  2) 30% by T/T in advance, balance against B/L copy  3) Other payment term Should be negotiated 3  Free service  Free seaming chuck (2 pc) 4  Other service  Cost effective seaming machine

954# Factory Manufacturer Empty Round Three Piece Tin Can With EOE About 200 years ago, tin can was invented for food packing and storage. Until now, tin can packaging is still one of the important method of food packaging. 3 piece can is able to be separated to round can and rectangular can in shape, and be separated to be vegetable can, meat can, fish can in usage. Interpack Group has 60 production lines in 5 branch factories to produce normal 3 piece cans， which makes it reach annual capacity of 3 billion. Besides, Interpack Group is able to provide machines such as seaming machine, filling machine, retort pot and technical support such as project design. Can Body Picture No. Item Spec 1  Material  TPS, T4CA 2  Diameter  401x204 3  Can Height  54.0 ± 0.10mm (Adjustable) 4  Thickness  0.20mm 5  Internal Lacquer  Gold Organosol 6  External Lacquer  Epoxy Amino - Plain or printed 7  Flange Width  2.8 ± 0.20mm 8  Internal Diameter  98.9 ± 0.10mm Double Seam Specification Picture No. Item Spec.   1  Seaming Length  2.70±0.10mm 2  Body Hook  1.95±0.10mm 3  Cover Hook  1.95±0.10mm 4  Seam Thickness  1.15±0.05mm 5  Overlap Percent  ≥60% 6  Tightness Rating  ≥70% Packaging Other Terms: No. Item Spec. 1  Lead time  Around 30 days 2  Payment term  1) 100% L/C at sight  2) 30% by T/T in advance, balance against B/L copy  3) Other payment term Should be negotiated 3  Free service  Free seaming chuck (2 pc) 4  Other service  Cost effective seaming machine

603# Easy Open Tin Can Lid Tin lids has two styles usually: standard normal end/lid and easy open end.. Standard normal end/lid must be opened by can-opener. Easy open lid is much more easily. You only need to pull the easy open ring, and then the food will be available. Picture No. Item Spec 1  Thickness  0.22mm 2  The volume of tin  2.8/2.8 3  Internal Diameter 153mm 4  Round edge height 1.75-2.15 5 Surface depth  0.90-1.20 6  Open force  15-30 7 Full open force  50-90 Packaging Other Terms: No. Item Spec. 1  Lead time  Around 30 days 2  Payment term  1) 100% L/C at sight  2) 30% by T/T in advance, balance against B/L copy  3) Other payment term Should be negotiated 3  Free service  Free seaming chuck (2 pc) 4  Other service  Cost effective seaming machine

756# Food Safety Round Empty Tin Can 2 piece can is made on punching machine, one piece tinplate sheet will be cut to be round shape firstly and then be punched vertically. 2 piece can usually has aluminum internal lacquer and used to pack meat and fish. 2 piece can is stack-able because the bottom diameter is a little smaller than top. It is able to make printing external surface, but it’s a little more difficult than 3 piece can. Anyway, Interpack Group can do it perfectly. Can Body Picture No. Item Spec 1  Material  TFS, T4BA 2  Diameter  307# (72.5mm± 0.10mm) 3  Height  (55.0) ± 0.10mm 4  Thickness  0.18mm 5  Internal Lacquer  Aluminized Organosol 6  External Lacquer  Epoxy Amino - Plain or printed 7  Flange Width  2.8 ± 0.20mm 8  Suitable food  Meat, fish and so on Double Seam Specification Picture No. Item Spec.   1  Countersink  3.30 ⁓ 3.50mm 2  Seam Thickness  1.20 ⁓ 1.40mm 3  Seam Length  2.80 ⁓ 3.00mm 4  Body Hook  1.80 ⁓ 2.10mm 5  Cover Hook  1.80 ⁓ 2.10mm 6  Actual Overlap  >1.02mm 7  %Overlap  >50 8  %Free Wrinkle  >60 Packaging Other Terms: No. Item Spec. 1  Lead time  Around 30 days 2  Payment term  1) 100% L/C at sight  2) 30% by T/T in advance, balance against B/L copy  3) Other payment term Should be negotiated 3  Free service  Free seaming chuck (2 pc) 4  Other service  Cost effective seaming machine

Empty Fish Meat Tin Can For Food Packaging 7104# About 200 years ago, tin can was invented for food packing and storage. Until now, tin can packaging is still one of the important method of food packaging. 3 piece can is able to be separated to round can and rectangular can in shape, and be separated to be vegetable can, meat can, fish can in usage. Interpack Group has 60 production lines in 5 branch factories to produce normal 3 piece cans， which makes it reach annual capacity of 3 billion. Besides, Interpack Group is able to provide machines such as seaming machine, filling machine, retort pot and technical support such as project design. Can Body Picture No. Item Spec 1  Material  TPS, T4CA 2  Diameter  300x407 3  Can Height  113.0 ± 0.10mm (Adjustable) 4  Thickness  0.18mm 5  Internal Lacquer  Gold Organosol 6  External Lacquer  Epoxy Amino - Plain or printed 7  Flange Width  2.7 ± 0.10mm 8  Internal Diameter  72.9 ± 0.15mm Double Seam Specification Picture No. Item Spec.   1  Seaming Length  2.70±0.10mm 2  Body Hook  1.85±0.10mm 3  Cover Hook  1.85±0.10mm 4  Seam Thickness  1.15±0.05mm 5  Overlap Percent  ≥60% 6  Tightness Rating  ≥70%  Packaging Other Terms: No. Item Spec. 1  Lead time  Around 30 days 2  Payment term  1) 100% L/C at sight  2) 30% by T/T in advance, balance against B/L copy  3) Other payment term Should be negotiated 3  Free service  Free seaming chuck (2 pc) 4  Other service  Cost effective seaming machine

Empty Fish Meat Tin Can For Food Packaging 7113# About 200 years ago, tin can was invented for food packing and storage. Until now, tin can packaging is still one of the important method of food packaging. 3 piece can is able to be separated to round can and rectangular can in shape, and be separated to be vegetable can, meat can, fish can in usage. Interpack Group has 60 production lines in 5 branch factories to produce normal 3 piece cans， which makes it reach annual capacity of 3 billion. Besides, Interpack Group is able to provide machines such as seaming machine, filling machine, retort pot and technical support such as project design. Can Body Picture No. Item Spec 1  Material  TPS, T4CA 2  Diameter  300x407 3  Can Height  113.0 ± 0.10mm (Adjustable) 4  Thickness  0.18mm 5  Internal Lacquer  Gold Organosol 6  External Lacquer  Epoxy Amino - Plain or printed 7  Flange Width  2.7 ± 0.10mm 8  Internal Diameter  72.9 ± 0.15mm Double Seam Specification Picture No. Item Spec.   1  Seaming Length  2.70±0.10mm 2  Body Hook  1.85±0.10mm 3  Cover Hook  1.85±0.10mm 4  Seam Thickness  1.15±0.05mm 5  Overlap Percent  ≥60% 6  Tightness Rating  ≥70%  Packaging Other Terms: No. Item Spec. 1  Lead time  Around 30 days 2  Payment term  1) 100% L/C at sight  2) 30% by T/T in advance, balance against B/L copy  3) Other payment term Should be negotiated 3  Free service  Free seaming chuck (2 pc) 4  Other service  Cost effective seaming machine