601# Empty Fish Tin Can for Sardines

601# Empty Fish Oval Tin Can For Fish Canning 2 piece can is made on punching machine, one piece tinplate sheet will be cut to be round shape firstly and then be punched vertically. 2 piece can usually has aluminum internal lacquer and used to pack meat and fish. 2 piece can is stack-able because the bottom diameter is a little smaller than top. It is able to make printing external surface, but it’s a little more difficult than 3 piece can. Anyway, Interpack Group can do it perfectly. Can Body Picture No. Item Spec 1  Can Height  37.50±0.50mm 2  Diameter  L159.5*W107.5*H37.5mm 3  Flange Wideth  2.80/3.00±0.50mm 4  Thickness  0.20mm 5  Internal Lacquer  Aluminum Organosol 6  External Lacquer  Aluminum Organosol Double Seam Specification Picture No. Item Spec.   1  Body Hook  1.90±0.10mm 2  Cover Hook  1.90±0.10mm 3  Overlap Length  ≥0.90mm 4  Seam Thickness  1.40±0.10mm 5  Overlap Percent  ≥50% 6  Tightness Rating  ≥50% 7  Net Content  397g 8  Counter Sink  3.15±0.15mm  9  Seaming Length  2.80±0.20mm Packaging Other Terms: No. Item Spec. 1  Lead time  Around 30 days 2  Payment term  1) 100% L/C at sight  2) 30% by T/T in advance, balance against B/L copy  3) Other payment term Should be negotiated 3  Free service  Free seaming chuck (2 pc) 4  Other service  Cost effective seaming machine

601# Empty Fish Oval Tin Can For Fish Canning 2 piece can is made on punching machine, one piece tinplate sheet will be cut to be round shape firstly and then be punched vertically. 2 piece can usually has aluminum internal lacquer and used to pack meat and fish. 2 piece can is stack-able because the bottom diameter is a little smaller than top. It is able to make printing external surface, but it’s a little more difficult than 3 piece can. Anyway, Interpack Group can do it perfectly. Can Body Picture No. Item Spec 1  Can Height  37.50±0.50mm 2  Diameter  L159.5*W107.5*H37.5mm 3  Flange Wideth  2.80/3.00±0.50mm 4  Thickness  0.20mm 5  Internal Lacquer  Aluminum Organosol 6  External Lacquer  Aluminum Organosol Double Seam Specification Picture No. Item Spec.   1  Body Hook  1.90±0.10mm 2  Cover Hook  1.90±0.10mm 3  Overlap Length  ≥0.90mm 4  Seam Thickness  1.40±0.10mm 5  Overlap Percent  ≥50% 6  Tightness Rating  ≥50% 7  Net Content  397g 8  Counter Sink  3.15±0.15mm  9  Seaming Length  2.80±0.20mm Packaging Other Terms: No. Item Spec. 1  Lead time  Around 30 days 2  Payment term  1) 100% L/C at sight  2) 30% by T/T in advance, balance against B/L copy  3) Other payment term Should be negotiated 3  Free service  Free seaming chuck (2 pc) 4  Other service  Cost effective seaming machine

202# RPT Easy Open Aluminum Can Lid Just as the name, aluminum lids is made by aluminum material. It usually has three styles: peel off lids, small open lids, full open lids. Peel off lids is made by aluminum foil, and it’s usually used for milk powder, peanut can. Small open lids has small open ring, it is usually used for beverage cans and beer cans. Full open lids is able to open fully, it is usually used for milk powder and peanut can too. Picture No. Item Spec 1  Gauge  0.224mm±0.005mm 2  Material Aluminium Alloy 5182 3  Internal Lacquer Organosol/ Epoxy 4  Outside Curl Diameter 59.44±0.25mm 5 Curl Height  2.07±0.15mm 6  Pop  7.0~20.0N 7 Pull  15.0~40.0N Packaging Other Terms: No. Item Spec. 1  Lead time  Around 30 days 2  Payment term  1) 100% L/C at sight  2) 30% by T/T in advance, balance against B/L copy  3) Other payment term Should be negotiated 3  Free service  Free seaming chuck (2 pc) 4  Other service  Cost effective seaming machine

202# Easy Open Tin Can Lid Tin lids has two styles usually: standard normal end/lid and easy open end.. Standard normal end/lid must be opened by can-opener. Easy open lid is much more easily. You only need to pull the easy open ring, and then the food will be available. Picture No. Item Spec 1  Thickness  0.19mm 2  The volume of tin  2.8/2.8 3  Internal Diameter 61.30-61.70 4  Round edge height  1.70-2.10 5 Surface depth  0.40-0.70 6  Open force  15-30 7 Full open force  40-80 Packaging Other Terms: No. Item Spec. 1  Lead time  Around 30 days 2  Payment term  1) 100% L/C at sight  2) 30% by T/T in advance, balance against B/L copy  3) Other payment term Should be negotiated 3  Free service  Free seaming chuck (2 pc) 4  Other service  Cost effective seaming machine

843# 2pc Round Food Tin Cans With EOE Open Lids 2 piece can is made on punching machine, one piece tinplate sheet will be cut to be round shape firstly and then be punched vertically. 2 piece can usually has aluminum internal lacquer and used to pack meat and fish. 2 piece can is stack-able because the bottom diameter is a little smaller than top. It is able to make printing external surface, but it’s a little more difficult than 3 piece can. Anyway, Interpack Group can do it perfectly. Can Body Picture No. Item Spec 1  Material  TFS, T4BA 2  Diameter  307# (83.3mm± 0.10mm) 3  Height  (38.10⁓46.10) ± 0.10mm 4  Thickness  0.18mm 5  Internal Lacquer  Aluminized Organosol 6  External Lacquer  Epoxy Amino - Plain or printed 7  Flange Width  2.8 ± 0.20mm 8  Suitable food  Meat, fish and so on Double Seam Specification Picture No. Item Spec.   1  Countersink  3.30 ⁓ 3.50mm 2  Seam Thickness  1.20 ⁓ 1.40mm 3  Seam Length  2.80 ⁓ 3.00mm 4  Body Hook  1.80 ⁓ 2.10mm 5  Cover Hook  1.80 ⁓ 2.10mm 6  Actual Overlap  >1.02mm 7  %Overlap  >50 8  %Free Wrinkle  >60 Packaging Other Terms: No. Item Spec. 1  Lead time  Around 30 days 2  Payment term  1) 100% L/C at sight  2) 30% by T/T in advance, balance against B/L copy  3) Other payment term Should be negotiated 3  Free service  Free seaming chuck (2 pc) 4  Other service  Cost effective seaming machine

Factory direct sale square tin cans 311 2 piece can is made on punching machine, one piece tinplate sheet will be cut to be round shape firstly and then be punched vertically. 2 piece can usually has aluminum internal lacquer and used to pack meat and fish. 2 piece can is stack-able because the bottom diameter is a little smaller than top. It is able to make printing external surface, but it’s a little more difficult than 3 piece can. Anyway, Interpack Group can do it perfectly. Can Body Picture No. Item Spec 1  Material  TFS, T2.5BA 2  Diameter  L106.6*W63*H28mm 3  Can Height  68.0 ± 0.10mm (Adjustable) 4  Thickness  0.20mm 5  Internal Lacquer  12g Aluminum Organosol 6  External Lacquer  5g Gold lacquer Double Seam Specification Picture No. Item Spec.   1  Width  69.40±0.25mm 2  Length  113.35±0.25mm 3  Curl Height  2.00±0.25mm 4  Countersink Depth  3.25±0.20mm 5  Seaming Compound Weight  95±15mm 6  Compressive Strength  ≥160mm 7  Pop strength  15-30mm 8  Tear trength  60-100mm  9  match up diameter of the can  103.85×59.85mm Packaging Other Terms: No. Item Spec. 1  Lead time  Around 30 days 2  Payment term  1) 100% L/C at sight  2) 30% by T/T in advance, balance against B/L copy  3) Other payment term Should be negotiated 3  Free service  Free seaming chuck (2 pc) 4  Other service  Cost effective seaming machine

Factory Directly Empty Easy Open Tin Can Food Tomato Paster Packing 539# About 200 years ago, tin can was invented for food packing and storage. Until now, tin can packaging is still one of the important method of food packaging. 3 piece can is able to be separated to round can and rectangular can in shape, and be separated to be vegetable can, meat can, fish can in usage. Interpack Group has 60 production lines in 5 branch factories to produce normal 3 piece cans， which makes it reach annual capacity of 3 billion. Besides, Interpack Group is able to provide machines such as seaming machine, filling machine, retort pot and technical support such as project design. Can Body Picture No. Item Spec 1  Material  TPS, T4CA 2  Diameter  202x108 3  Can Height  39.0 ± 0.10mm (Adjustable) 4  Thickness  0.18mm 5  Internal Lacquer  Gold Organosol 6  External Lacquer  Epoxy Amino - Plain or printed 7  Flange Width  2.7 ± 0.10mm 8  Internal Diameter  52.3 ± 0.15mm Double Seam Specification Picture No. Item Spec.   1  Seaming Length  2.70±0.10mm 2  Body Hook  1.85±0.10mm 3  Cover Hook  1.85±0.10mm 4  Seam Thickness  1.15±0.05mm 5  Overlap Percent  ≥60% 6  Tightness Rating  ≥70% Packaging Other Terms: No. Item Spec. 1  Lead time  Around 30 days 2  Payment term  1) 100% L/C at sight  2) 30% by T/T in advance, balance against B/L copy  3) Other payment term Should be negotiated 3  Free service  Free seaming chuck (2 pc) 4  Other service  Cost effective seaming machine