311# Empty Sardine Tin Can

311 Customize Empty Sardine Fish Tin Can For Meat Packaging 2 piece can is made on punching machine, one piece tinplate sheet will be cut to be round shape firstly and then be punched vertically. 2 piece can usually has aluminum internal lacquer and used to pack meat and fish. 2 piece can is stack-able because the bottom diameter is a little smaller than top. It is able to make printing external surface, but it’s a little more difficult than 3 piece can. Anyway, Interpack Group can do it perfectly. Can Body Picture No. Item Spec 1  Material  TFS, T2.5BA 2  Diameter  L106.6*W63*H28mm 3  Can Height  68.0 ± 0.10mm (Adjustable) 4  Thickness  0.20mm 5  Internal Lacquer  12g Aluminum Organosol 6  External Lacquer  5g Gold lacquer Double Seam Specification Picture No. Item Spec.   1  Width  69.40±0.25mm 2  Length  113.35±0.25mm 3  Curl Height  2.00±0.25mm 4  Countersink Depth  3.25±0.20mm 5  Seaming Compound Weight  95±15mm 6  Compressive Strength  ≥160mm 7  Pop strength  15-30mm 8  Tear trength  60-100mm  9  match up diameter of the can  103.85×59.85mm Packaging Other Terms: No. Item Spec. 1  Lead time  Around 30 days 2  Payment term  1) 100% L/C at sight  2) 30% by T/T in advance, balance against B/L copy  3) Other payment term Should be negotiated 3  Free service  Free seaming chuck (2 pc) 4  Other service  Cost effective seaming machine

105# 2-piece empty snack food can 2 piece can is made on punching machine, one piece tinplate sheet will be cut to be round shape firstly and then be punched vertically. 2 piece can usually has aluminum internal lacquer and used to pack meat and fish. 2 piece can is stack-able because the bottom diameter is a little smaller than top. It is able to make printing external surface, but it’s a little more difficult than 3 piece can. Anyway, Interpack Group can do it perfectly. Other Terms: No. Item Spec. 1  Lead time  Around 30 days 2  Payment term  1) 100% L/C at sight  2) 30% by T/T in advance, balance against B/L copy  3) Other payment term Should be negotiated 3  Free service  Free seaming chuck (2 pc) 4  Other service  Cost effective seaming machine

125g Club Quality food grade round milk can supplier 2 piece can is made on punching machine, one piece tinplate sheet will be cut to be round shape firstly and then be punched vertically. 2 piece can usually has aluminum internal lacquer and used to pack meat and fish. 2 piece can is stack-able because the bottom diameter is a little smaller than top. It is able to make printing external surface, but it’s a little more difficult than 3 piece can. Anyway, Interpack Group can do it perfectly. Can Body Picture No. Item Spec 1  Material  TFS, T2.5BA 2  Diameter  L106.6*W63*H28mm 3  Can Height  68.0 ± 0.10mm (Adjustable) 4  Thickness  0.20mm 5  Internal Lacquer  12g Aluminum Organosol 6  External Lacquer  5g Gold lacquer Double Seam Specification Picture No. Item Spec.   1  Width  69.40±0.25mm 2  Length  113.35±0.25mm 3  Curl Height  2.00±0.25mm 4  Countersink Depth  3.25±0.20mm 5  Seaming Compound Weight  95±15mm 6  Compressive Strength  ≥160mm 7  Pop strength  15-30mm 8  Tear trength  60-100mm  9  match up diameter of the can  103.85×59.85mm Packaging Other Terms: No. Item Spec. 1  Lead time  Around 30 days 2  Payment term  1) 100% L/C at sight  2) 30% by T/T in advance, balance against B/L copy  3) Other payment term Should be negotiated 3  Free service  Free seaming chuck (2 pc) 4  Other service  Cost effective seaming machine

Factory direct sale square tin cans 311 2 piece can is made on punching machine, one piece tinplate sheet will be cut to be round shape firstly and then be punched vertically. 2 piece can usually has aluminum internal lacquer and used to pack meat and fish. 2 piece can is stack-able because the bottom diameter is a little smaller than top. It is able to make printing external surface, but it’s a little more difficult than 3 piece can. Anyway, Interpack Group can do it perfectly. Can Body Picture No. Item Spec 1  Material  TFS, T2.5BA 2  Diameter  L106.6*W63*H28mm 3  Can Height  68.0 ± 0.10mm (Adjustable) 4  Thickness  0.20mm 5  Internal Lacquer  12g Aluminum Organosol 6  External Lacquer  5g Gold lacquer Double Seam Specification Picture No. Item Spec.   1  Width  69.40±0.25mm 2  Length  113.35±0.25mm 3  Curl Height  2.00±0.25mm 4  Countersink Depth  3.25±0.20mm 5  Seaming Compound Weight  95±15mm 6  Compressive Strength  ≥160mm 7  Pop strength  15-30mm 8  Tear trength  60-100mm  9  match up diameter of the can  103.85×59.85mm Packaging Other Terms: No. Item Spec. 1  Lead time  Around 30 days 2  Payment term  1) 100% L/C at sight  2) 30% by T/T in advance, balance against B/L copy  3) Other payment term Should be negotiated 3  Free service  Free seaming chuck (2 pc) 4  Other service  Cost effective seaming machine

Modern design 125g Club tin cans manufacturer 2 piece can is made on punching machine, one piece tinplate sheet will be cut to be round shape firstly and then be punched vertically. 2 piece can usually has aluminum internal lacquer and used to pack meat and fish. 2 piece can is stack-able because the bottom diameter is a little smaller than top. It is able to make printing external surface, but it’s a little more difficult than 3 piece can. Anyway, Interpack Group can do it perfectly. Can Body Picture No. Item Spec 1  Material  TFS, T2.5BA 2  Diameter  L106.6*W63*H28mm 3  Can Height  68.0 ± 0.10mm (Adjustable) 4  Thickness  0.20mm 5  Internal Lacquer  12g Aluminum Organosol 6  External Lacquer  5g Gold lacquer Double Seam Specification Picture No. Item Spec.   1  Width  69.40±0.25mm 2  Length  113.35±0.25mm 3  Curl Height  2.00±0.25mm 4  Countersink Depth  3.25±0.20mm 5  Seaming Compound Weight  95±15mm 6  Compressive Strength  ≥160mm 7  Pop strength  15-30mm 8  Tear trength  60-100mm  9  match up diameter of the can  103.85×59.85mm Packaging Other Terms: No. Item Spec. 1  Lead time  Around 30 days 2  Payment term  1) 100% L/C at sight  2) 30% by T/T in advance, balance against B/L copy  3) Other payment term Should be negotiated 3  Free service  Free seaming chuck (2 pc) 4  Other service  Cost effective seaming machine

125g Club Quality food grade round milk can supplier 2 piece can is made on punching machine, one piece tinplate sheet will be cut to be round shape firstly and then be punched vertically. 2 piece can usually has aluminum internal lacquer and used to pack meat and fish. 2 piece can is stack-able because the bottom diameter is a little smaller than top. It is able to make printing external surface, but it’s a little more difficult than 3 piece can. Anyway, Interpack Group can do it perfectly. Can Body Picture No. Item Spec 1  Material  TFS, T2.5BA 2  Diameter  L106.6*W63*H28mm 3  Can Height  68.0 ± 0.10mm (Adjustable) 4  Thickness  0.20mm 5  Internal Lacquer  12g Aluminum Organosol 6  External Lacquer  5g Gold lacquer Double Seam Specification Picture No. Item Spec.   1  Width  69.40±0.25mm 2  Length  113.35±0.25mm 3  Curl Height  2.00±0.25mm 4  Countersink Depth  3.25±0.20mm 5  Seaming Compound Weight  95±15mm 6  Compressive Strength  ≥160mm 7  Pop strength  15-30mm 8  Tear trength  60-100mm  9  match up diameter of the can  103.85×59.85mm Packaging Other Terms: No. Item Spec. 1  Lead time  Around 30 days 2  Payment term  1) 100% L/C at sight  2) 30% by T/T in advance, balance against B/L copy  3) Other payment term Should be negotiated 3  Free service  Free seaming chuck (2 pc) 4  Other service  Cost effective seaming machine

Factory direct sale square tin cans 311 2 piece can is made on punching machine, one piece tinplate sheet will be cut to be round shape firstly and then be punched vertically. 2 piece can usually has aluminum internal lacquer and used to pack meat and fish. 2 piece can is stack-able because the bottom diameter is a little smaller than top. It is able to make printing external surface, but it’s a little more difficult than 3 piece can. Anyway, Interpack Group can do it perfectly. Can Body Picture No. Item Spec 1  Material  TFS, T2.5BA 2  Diameter  L106.6*W63*H28mm 3  Can Height  68.0 ± 0.10mm (Adjustable) 4  Thickness  0.20mm 5  Internal Lacquer  12g Aluminum Organosol 6  External Lacquer  5g Gold lacquer Double Seam Specification Picture No. Item Spec.   1  Width  69.40±0.25mm 2  Length  113.35±0.25mm 3  Curl Height  2.00±0.25mm 4  Countersink Depth  3.25±0.20mm 5  Seaming Compound Weight  95±15mm 6  Compressive Strength  ≥160mm 7  Pop strength  15-30mm 8  Tear trength  60-100mm  9  match up diameter of the can  103.85×59.85mm Packaging Other Terms: No. Item Spec. 1  Lead time  Around 30 days 2  Payment term  1) 100% L/C at sight  2) 30% by T/T in advance, balance against B/L copy  3) Other payment term Should be negotiated 3  Free service  Free seaming chuck (2 pc) 4  Other service  Cost effective seaming machine

Factory direct sale square tin cans 311 2 piece can is made on punching machine, one piece tinplate sheet will be cut to be round shape firstly and then be punched vertically. 2 piece can usually has aluminum internal lacquer and used to pack meat and fish. 2 piece can is stack-able because the bottom diameter is a little smaller than top. It is able to make printing external surface, but it’s a little more difficult than 3 piece can. Anyway, Interpack Group can do it perfectly. Can Body Picture No. Item Spec 1  Material  TFS, T2.5BA 2  Diameter  L106.6*W63*H28mm 3  Can Height  68.0 ± 0.10mm (Adjustable) 4  Thickness  0.20mm 5  Internal Lacquer  12g Aluminum Organosol 6  External Lacquer  5g Gold lacquer Double Seam Specification Picture No. Item Spec.   1  Width  69.40±0.25mm 2  Length  113.35±0.25mm 3  Curl Height  2.00±0.25mm 4  Countersink Depth  3.25±0.20mm 5  Seaming Compound Weight  95±15mm 6  Compressive Strength  ≥160mm 7  Pop strength  15-30mm 8  Tear trength  60-100mm  9  match up diameter of the can  103.85×59.85mm Packaging Other Terms: No. Item Spec. 1  Lead time  Around 30 days 2  Payment term  1) 100% L/C at sight  2) 30% by T/T in advance, balance against B/L copy  3) Other payment term Should be negotiated 3  Free service  Free seaming chuck (2 pc) 4  Other service  Cost effective seaming machine